《ASTM F36衬垫材料的可压缩性和复原性的标准试验方法.docx》由会员分享,可在线阅读,更多相关《ASTM F36衬垫材料的可压缩性和复原性的标准试验方法.docx(1页珍藏版)》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、ASTM F36衬垫材料的可压缩性和复原性的标准试验方法ASTM F36衬垫材料的可压缩性和复原性的标准试验方法一标准名称Standard Test Method for Compressibility and Recovery of Gasket MaterialsASTM F36衬垫材料的可压缩性和复原性的标准试验方法ASTM F36衬垫材料的可压缩性和复原性的标准试验方法一适用范围Scope:This test method covers determination of the short-time compressibility and recovery at room temper
2、ature of sheet gasket materials, form-in-place gaskets, and in certain cases, gaskets cut from sheets. It is not intended as a test for compressibility under prolonged stress application, generally referred to as creep,“ or for recovery following such prolonged stress application, the inverse of whi
3、ch is generally referred to as compression set. Also, it is not intended for tests at other than room temperature. A resiliency characteristic (the amount recovered expressed as a percentage of the compressed thickness) may also be calculated from the test data where desiredASTM F36衬垫材料的可压缩性和复原性的标准试验方法一引用文件ASTM D3297 Practice for Molding and Machining Tolerances for PTFE Resin PartsASTM E691 Practice for Conducting an Inter laboratory Study to Determine the Precision of a Test MethodASTM F104 Classification System for Nonmetallic Gasket Materials