《专利实施许可合同-模板(中英文对照).doc》由会员分享，可在线阅读，更多相关《专利实施许可合同-模板(中英文对照).doc（17页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、专利技术许可证合同 （中英文）LICENCE CONTRACT FOR PATENT AND TECHNOLOGY签约时间：Signing Date： _签约地点：Signing Place：_合同编号：Contract No。：_中国_（以下简称“接受方”）为一方，_国_公司(以下简称“许可方”）为另一方:China _ （hereinafter referred to as “Licensee on the one hand and _ Company _City， _Country (hereinafter referred to as “Licensor”） on the other
2、hand； Whereas the patent right of _is owned by Licensor；鉴于许可方是_技术的专利持有者;Whereas Licensor has the right and agreed to grant Licensee the rights to use， manufacture and sell the Contract Products of the Patented Technology;鉴于许可方有权,并且也同意将_专利技术的使用权、制造权和产品的销售权授权接受方；Whereas Licensee hope to use the Patent
3、ed Technology of Licensor to manufacture and sell the Contract Products; 鉴于接受方希望利用许可方的专利技术制造和销售产品；双方授权代表通过友好协商,同意就以下条款签订本合同.Both parties authorized representatives, through friendly negotiation， have agreed to enter into this Contract under the terms as stipulated below。第一条 定 义 Section 1 Definitions
4、1。1 “专利技术”是指本合同附件一中所列的技术，该技术已于_年_ 月_日经 国专利局批准,获得了专利权，其专利编号为_。1.1 Patented Technology means the technology which has been written in Appendix 1 to the Contract, it was approved by China Patent Office in _and granted the patent right， the patent number is _。1.2 “许可方是指_国_公司，或者该公司的法人代表、代理和财产继承者。1.2 “Lic
5、ensor” means _ Company， _ City， _Country, or the legal representative, or agency or the property successor of the Company。1。3 “接受方是指中国_公司，或者该公司的法人代表、代理和财产继承者。1.3“Licensee”means China _Corporation， or the legal representative， or agency or the property successor of the Corporation.1.4 “合同产品是指合同附件二中所列
6、的产品。1。4“The Contract Products mean the products stipulated in Appendix 2 to the Contract。1.5 “合同工厂”是指生产合同产品的工厂,该工厂在_省_市， 名叫_工厂。1.5 “The Contract Factory” means the factory which manufactures the Contract Products， it is located in _City， _Province and named as _.1.6 “净销售价”是指合同产品的销售发票价格扣除包装费、运输费、保险费、
7、佣金、商业折扣、税费、外购件等费用后的余额。1。6 “Net Selling Price” means the remaining sum which the selling commercial invoice price deducts the packing expenses, transportation expenses, insurance premium, commissions, commercial discounts, taxes and expenses for bought out elements and parts etc.1.7“技术资料”，是指列于附件一与制造和
8、维修合同产品有关的工程、制造及原始资料，包括与制造设备、工具和装置有关的图纸、蓝本、设计图表、材料规格、照片、影印资料和一般资料,设计及其说明书等。但上述资料仅限于许可方拥有的资料和接受方用于本合同业务活动的资料；1。7 Technical Documents means engineering， manufacturing and originating information relation to the manufacture and servicing of Contract Products, including drawings， blueprints， design sheet
9、s， material specifications, photographs, photocopies and general data, and designs and specifications relating to manufacturing Contract Products， tools and fixtures， but includes, however, only such information as is available to licensor and applicable to the operations of Licensee under this Cont
10、ract which detailed as per Appendix 1 to the Contract. 1。8 “合同生效日”是指本合同双方有关部门的最后一方的批准日期。1。8“The Date of Coming into Force of the Contract means the date of ratification of the Contract by the competent authorities of both parties， whichever comes later.第二条 合同范围 Section 2 Scope of the Contract2.1 接受方
11、同意从许可方取得，许可方同意向接受方授予合同产品的设计、制造和销售的专利技术。这种技术应与许可方最新产品的技术完全一致。2.1 Licensee agrees to obtain from Licensor, and Licensor agrees to grant Licensee the patented technology to design， Such Patented Technology shall be in exact accordance with the technology of Licensor latest products。2.2 合同产品的名称、型号、规格和技术
12、参数详见合同附件二.2。2 manufacture specification and technical indices of the Contract Products are detailed in Appendix 2 to the Contract.2。3 许可方授予以非独占许可方式许可接受方在 国设计制造合同产品，使用、销售和出口合同产品的许可权。2.3 Licensor agrees to grant Licensee the nonexclusive license and right to design, manufacture, use, sell and export t
13、he Contract Products in 。 2。4 许可方负责向接受方提供合同产品的技术资料，包括专利的名称、内容、申请情况和专利编号等，具体的资料详见本合同附件一。2.4 Licensor is responsible for providing Licensee with the Technical Documents of the Contract products, including the mane, content， application for patent and number of the patent， etc。， the specific documentat
14、ion is detailed in Appendix 1 to the Contract。2.5 许可方有责任接收、安排接受方赴许可方培训的技术人员,许可方应设法使其掌握上述合同产品专利技术。（详见本合同附件三）2。5 Licensor shall be responsible for the training of Licensee technical personnel in Licensor relevant facilities and also do its best to enable Licensee technical personnel to master the Pate
15、nted Technology of the aforesaid Contract Product (details as per Appendix 3 to the Contract).2.6 许可方负责自费派遣技术人员赴接受方进行技术服务。(详见本合同附件四）2。6 Licensor is obliged to send at its own expense technical personnel to Licensee factory for technical service （details as per Appendix 4 to the Contract)。2.7 在合同的执行中
16、，如果接受方需要许可方提供技术服务或一部分生产所需的零部件或原材料时，许可方有义务以最优惠的价格向接受方提供，届时双方另行协商签订合同.2.7 In the course of implementation of the Contract， Licensor is under an obligation， upon the request of Licensee, to provide Licensee at the best favorable price with the technical services or some components, spare parts and raw
17、materials which are necessary for manufacturing the Contract Products. When the time comes， both parties will sign the new contract through friendly consultation。2.8 许可方同意接受方使用其商标的权利，在合同产品上可以采用双方的联合商标。或者标明“根据许可方的许可制造的字样。2.8 Licensor agrees to grant Licensee the license and right to use the trade mar
18、k of Licensor， while the combined trade mark of both parties or mark the wording production according to Licensors license on the Contract Products can be also adopted.第三条 合同价格 Section 3 Price of the Contract3.1本合同涉及的专利实施许可费等计价的货币为美元(）。合同总价金额为_，采用一次性总付方式,合同生效之日起_日内,接受方将专利实施许可费全部汇至许可方账号。3.1 Royalty f
19、ee and other cost of the Contract shall be paid in dollar()，Licensee shall pay Licensor a lump-sum retaining fee of _Which is due and payable _ days from the date when the Contract takes effect。第四条 支付条件Article 4 Conditions of Payment4.1 本合同第三条中规定的专利实施许可费，接受方将通过_银行（此处为接受方的业务银行）和_银行（此处为许可方的业务银行）支付给许可方
20、，支付中使用的货币为_。4。1 Royalty fee stipulated in Section 3 to the Contract shall be paid by Licensee to Licensor through the Bank_(here it is the business Bank of Licensee, and the Bank_(here it is the business Bank of Licensor)， payment shall be settled in_.4。2 许可方在收到接受方按规定开具有关的单据,接受方在收到许可方出具的下列单据后三十天内.经审
21、核无误，即支付专利实施许可费给许可方：4.2 Licensor shall issue the related documents, the Royalty fee shall be paid by Licensee to Licensor within 30（thirty) days after Licensee has received the following documents which are provided by Licensor and found them in conformity with the stipulations of the Contract。4。3 按本
22、合同规定，如许可方需要向接受方支付罚款或赔偿时，接受方有权从上述支付中直接扣除。4.3 Licensee shall have the right to deduct from any of the above mentioned payment the penalties and/or compensations which Licensor shall pay in accordance with the stipulations of the Contract。第五条 技术服务和培训 Article 5 Technical service and Training5。1 技术服务 Tec
23、hnical Service（1）许可方在合同有效期内派遣一名技术专家到接受方，对合同产品的图纸和技术资料进行解释，并就产品设计、制造、调试和检验,以及维修等方面进行技术指导，以使接受方在保证合同产品性能的情况下，能尽快采用国产的材料和元器件，实现合同产品的生产。(1）During the validity period of the Contract, Licensor shall send a specialist to Licensee s factory to explain the drawings and technical documents and to provide tec
24、hnical service in designing, manufacturing, adjustment, inspection and maintenance of the Contracted Product so to enable Licensee to use， as fast as possible， home material sand raw components without affecting the properties of the Products so manufactured.（2）许可方在合同有效期内分两次派遣技术人员赴接受方进行技术服务，共_人日。（2)
25、Licensor shall twice send its specialists to Licensees factory to provide technical service for a total of working days man。（3)第一次技术服务在合同生效后第六个月，许可方派遣技术人员1人赴接受方工厂，提供技术指导_日。（3）The first technical service sha1l start in the sixth month after the Contract comes into effect。 Licensor shall send a specia
26、list to Licensees factory to provide technical service for working days/man。（4）第二次技术服务在合同产品验收期间。许可方派遣技术人员1人赴接受方工厂,提供技术服务,时间为_日。（4）The second technical service shall start during the verification of the Contract Products。 Licensor shall send a specialist to Licensees factory to provide technical serv
27、ice for working days/man.（5)许可方负担其人员的旅差费。接受方负担由驻地到工厂的交通工具和膳宿费。（5)Licensor shall， for its specialists, bear their travelling expense. Licensee shall be responsible for Boarding and lodging and affording the means of conveyance from the lodging place to the factory。第六条 技术资料 Article 6 Technical Documen
28、ts6.1 以许可方应按本合同附件一规定的内容和时间，在_交付技术资料。6。1 Licensor shall according to the delivery schedule and details stipulated in Appendix 1 to the Contract， deliver the documents at_.6。2 _的邮戳日期，为技术资料的实际交付日期。接受方将带有到达印戳日期的空运提单影印本1份寄给许可方。6.2 The date stamped by the air transportation agency at_, shall be taken as t
29、he actual date of delivery Licensee shall send to Licensor a photostat copy of the air consignment note showing the stamped date of arrival。6。3 在每批技术资料发运后24小时内,许可方应将合同号、空运提单号、空运报单日期、资料项目、件数、重量、航班号和预计抵达日期用电报或电传通知接受方.同时将空运提单和技术资料详细清单各一式2份寄给接受方.6.3 Within twentyfour hours after the dispatch of each lot
30、 of the technical documents, Licensor shal1 notify Licensee by cable or telex of the contract number, number and date of the air consignment note, items of the documents, number of pieces， airmail to Licensee two copies of each of the air consignment note and detailed list of the technical documents
31、。6.4 若技术资料在空运中丢失、损坏、短缺,许可方应在收到接受方书面通知后30天内，免费外寄或重寄给接受方。在接受方收到技术资料后60天内，如果没有以书面形式提出资料不全或增补要求，则视为接受方验收。6.4 If the technical documents are found lost, damaged or mutilated during air transportation， Licensor shall supply Licensee free of charge with a second lot of documents within the shortest possibl
32、e time but not later than thirty days after it has received from Licensee the written notice. Within sixty days after Licensee has received the documents from Licensor， if Licensee does not declare the shortage and request to cover the same, it is considered acceptance.6。5 技术资料采用英文，计量单位以公制表示。6.5 The
33、 technical documents shall be in English and based on metric system of measurements.第七条 考核与验收 Article 7 Verification and Acceptance7。1 合同产品的第一台样机,由双方组成的联合考核小组，按附件5规定的时间和内容进行考核。如果符合附件一规定的技术要求,即可验收，并由双方代表签署合同产品考核验收合格证书一式4份，双方各执两份。7.1 The Verification Test on the first sample machine of the Contracted
34、Product shall be carried out by the joint group consisting of Licensee and Licensor representatives according to the schedule and contents stipulated in in Appendix 5 to the Contract。 If the performance of the Contracted Product is in conformity with the technical specifications stipulated in Append
35、ix 1, such test shall be considered as qualified and the representatives of both parties shall sign the Inspection and Testing Certificate for the proper performance of the Contracted Product in quadruplicate， 2 copies for each party。7。2 如果合同产品的技术性能达不到规定的技术标准，双方应友好协商,共同研究，分析原因，采取措施,消除缺陷，进行第二次性能考核.考核
36、合格后，双方签署考核合格证书。7.2 If the Verification Test demonstrates that the performance of the Contracted Product is not in conformity with prescribed technical specifications, both parties shall， through amicable negotiations, make a joint study of and analyze the cause and take measures to eliminate the def
37、ects and carry out a second test. When the second test demonstrates the performance is qualified, both parties shall sign a testing certificate for the proper performance.7。3 如果第一次考核不合格是许可方责任，许可方应自费再次派遣技术人员进特第二次考核。7.3 If Licensor is responsible for the failure of the first test, Licensor shall dispa
38、tch at its own expense technical personnel for the second test.7.4 经过第二次考核仍不能合格验收，若责任在于许可方，则许可方须赔偿接受方遭受的直接损失.并采取措施消除缺陷，进行第三次考核。7.4 If the second test fails again and the failure is attributed to Licensor， Licensor shall indemnify Licensee for any losses sustained and shall take effective measures to
39、 eliminate the defects and carry out a third test.7.5 经过第三次考核仍不合格,如系许可方责任,则接受方有权终止合同，并接第九条的规定处理。若系接受方责任，则由双方协商合同进一步执行的问题。7。5 If the third test again fails, and if Licensor is responsible for the failure，Licensee has the right to terminate the Contract at its discretion and lodge claims as stipulated
40、 in Article9. If the responsibility for the failure lies with Licensee， the two Parties shall negotiate as to how to further implement the Contract。第八条 技术改进 Article 8 Technical Improvements8。1 许可方提供的技术资料，如有不适合接受方生产条件的（如设计标准、原材料、外购配件及共他生产设备等，许可方有责任帮助接受方修改技术资料，并加以确认。在不影响合同产品性能情况下,应采用国产的原材料、配套元器件和设备。8.
41、1 If the technical documents provided by Licensor are not applicable to Licensee actual production conditions (such as design standards， raw materials， purchased parts for the machine， production facilities）， Licensor is obliged to assist Licensee in modifying the technical documents and confirm the
42、 same. upon the condition that the properties of the Contracted Products are not affected， raw materials， fittings and equipment of domestic origin may be used.8.2 在合同有效期内，双方对合同产品的任何改进和创新，都免费将改进或创新的技术资料提供给对方。8。2 During the currency of the Contract。 If either of the two parties effect improvements on
43、 or developments of the Products within the period stipulated in the Contract，the said party shall submit, free of charge, to the other party the technological information concerning such improvements or developments。8。3 改进或创新的技术所有权属于改进或创新一方，另一方不得对其申请专利或将其转让给第三者。8。3 The ownership of such improvement
44、s on or developments of the Contracted Product shall belong to the party who has effected such improvements or developments. The other party shall not apply for patent or transfer the same to any third arty。第九条 保证和索赔Article 9 Guarantees and Claims9.1 许可方保证所提供的技术资料是许可方经过实际使用的最新技术资料，并保证向接受方及时提供任何改进和发明
45、的技术资料.9。1 Licensor guarantees that the technical documents to be supplied by Licensor are the latest technical information which has been put into practical use by Licensor。 Licensor also under takes to supply to Licensee in time the technical information relevant to any development of or improvemen
46、t on the Contracted Product.9。2 许可方保证所提供的技术资料是完整的、正确的、清晰的，并保证按时交付。9.2 Licensor guarantees that the technical documents to be supplied by Licensor are complete, correct， legible and are to be dispatched in time.9.3 如果许可方提供的技术资料不符合第六条规定，许可方必须在收到接受方书面通知后30天内免费将所缺的技术资料，或清晰、正确的资料寄给接受方。9.3 If the document
47、s supplied by Licensor are not in conformity with the stipulation in Article 6， Licensor shall， within the shortest possible time but not later than 30 days after receipt of Licensee written notice, dispatch free of charge to Licensee the missing or the correct and legible technical documents.9。4 如许可方的技术资料不能按本合同附件一规定的时间交付,许可方则须按下列比例支付罚款给接受方：9.4 If Licensor fails to dispatch the said documents within the stipulated period as per Appendix 1， Licensor shall pay penalty to Licensee in the following proportions:(1）迟交1至4周,罚款为合同总