《商务邮件常用句型外语学习商务英语_外语学习-商务英语.pdf》由会员分享，可在线阅读，更多相关《商务邮件常用句型外语学习商务英语_外语学习-商务英语.pdf（13页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、学习好资料 欢迎下载 初次开场白：It is my pleasure to write here for you.回复开场白：Further to our conversation earlier,.As discussed over the phone,.Thanks for you kind reply.Thank you for your inquiry/email.Thanks for your letter.It is my pleasure to receive your reply!Thanks for your mail of 日期.结尾：We will noted and m
2、any thanks!I hope everything with you is fine.Many thanks for your support.I hope you are well and in good health!FYI:for your information 仅供参考 深盼贵公司及早回复(1)We hope to receive your favors at early date.(2)We hope to be favored with a reply with the least delay.(3)We await good news with patience.(4)W
3、e hope to receive a favorable reply per return mail.(5)We await the favor of your early(prompt)reply.(6)A prompt reply would greatly oblige us.(7)We trust you will favor us with an early(prompt)reply.(8)We trust that you will reply us immediately.(9)We should be obliged by your early(prompt)reply.(1
4、0)Will you please reply without delay what your wishes are in this matter?(11)Will you kindly inform us immediately what you wish us to do?(12)We request you to inform us of your decision by return of post.(13)We are waiting(anxious to receive)your early reply.(14)We should appreciate an early reply
5、.(15)We thank you for the courtesy to your early attention.(16)We hope to receive your reply with the least possible delay.(17)Kindly reply at your earliest convenience.(18)Please send your reply by the earliest delivery.(19)Please send your reply by messenger.(20)Please reply immediately.(21)Please
6、 favor us with your reply as early as possible.(22)Please write to us by tonights mail,without fail.(23)May we remind you that we are awaiting your early reply?(24)May we request the favor of your early reply?(25)A prompt reply would help us greatly.(26)A prompt reply will greatly oblige us.学习好资料 欢迎
7、下载(27)Your prompt reply would be greatly appreciated.(28)Your prompt attention to this matter would be greatly esteemed.(29)We look forward to receiving your early reply.(30)As the matter is urgent,an early reply will reply.(31)We reply on receiving your reply by return of post.(32)We request you to
8、 accept our warmest thanks for the anticipated favor.(33)We thank you in advance for the anticipated favor.盼望以传真答复(1)We await your reply by fax.(2)Please fax reply to fax this morning.(3)We are anxiously awaiting your reply by fax.(4)Please arrange for your fax reply,or long distance call,to reach u
9、s before noon Monday.(5)Fax reply immediately.(6)Please acknowledge by fax the receipt of these instructions.(7)Please do not fail to fax your reply immediately on receipt of this letter.(8)Please fax your decision without delay as we have offers waiting.(9)Oblige us by replying by fax before noon t
10、omorrow,as we have another offer.(10)Inform us by fax of your lowest quotations.(11)Fax in time for us to write you in reply by 7 pm mail.(12)Fax me from Osaka before noon stating your telephone number.(13)Kindly reply me by wire.承蒙贵公司重视,感谢之至(1)Please accept our thanks for your usual kind attention.
11、(2)Please accept our thanks for the trouble you have taken.(3)We are obliged to you for your kind attention in this matter.(4)We are greatly obliged for your trial order just received.(5)We wish to assure you of your appreciation of your courtesy in this matter.(6)We thank you for your order just re
12、ceived.(7)We thank you for the special care you have given to the matter.(8)We tender you our sincere thanks for your generous treatment of us in this affair.(9)Allow us to thank you for the kindness extended to us.(10)We are very sensible of your friendly services on our behalf,for which please acc
13、ept our sincere thanks.回函迟误,请见谅(1)Please excuse my late reply to your very friendly letter of March 1.(2)I hope you will forgive me for not having written you for so long.(3)I hope you will excuse me for not having replied to you until today.(4)I humbly apologize to you for my delay in answering you
14、r kind letter of May 5.(5)I have to(must)apologize you for not answering your letter in time.我们将随时为你服务(1)We assure you of our best services at all times.(2)We shall spare no efforts in endeavoring to be of service to you.(3)We shall be pleased to be of service to you at all times.为贵公司带来不便,特此致歉,并请原谅
15、关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载(1)We hope you will pardon us for troubling you.(2)We regret the trouble we are causing
16、you.(3)I regret the trouble it caused you.(4)We trust you will excuse us for this inconvenience.(5)We wish to crave your kind forbearance for this trouble.(6)We solicit your forbearance for such an annoyance.(7)Kindly excuse me for troubling you in this matter.对此错误,谨致歉意,务请原谅(1)Please excuse this cle
17、rical error.(2)We tender you our apology for the inconvenience this error may have caused you.(3)We request you to accept our regret for the error of our clerk.(4)We greatly regret that we have caused you such an inconvenience.(5)We wish to express our regret for the annoyance this mistake has cause
18、d you.(6)We frankly admit we were at fault and we are anxious to repair the consequences.恳请贵公司支持惠顾(1)We solicit a continuance of your valued favors.(2)We solicit a continuance of your confidence and support.(3)We hope we may receive your further favors.(4)We hope to receive a continuance of your kin
19、d patronage.(5)We request you to favors us with a continuance of your kind support.(6)We solicit a continuance of your kind patronage.若有机会本公司也愿提供类似服务(1)It would give us great pleasure to render you a similar service should an opportunity occur.(2)We wish to reciprocate the goodwill.(3)We shall on a
20、similar occasion be pleased to reciprocate.(4)We hope to be able to reciprocate your good offices on a similar occasion.(5)We are always ready to render you such of similar services.(6)We shall at all times be willing to reciprocate such of similar favors.(7)We shall be happy to have an opportunity
21、of reciprocating to you on a similar occasion.1.Initiate a meeting 发起会议 I would like to hold a meeting this afternoon about our development planning for project A.今天下午我将举行一个会议，就 A 项目的发展计划开会讨论一下。I suggest we have a call tonight at 9:30pm(GMT+8)with Brown.Please let me know if the time is okay for you
22、 and Ben.我建议我们今晚九点半和 Brown 小聚一下，你和 Ben 有没有空?Wed like to have the meeting on Thu Oct 30.Same time.十月三十号(周四),老时间,开会。关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则
23、为不合格若不合格则从同一批中再截学习好资料 欢迎下载 Lets make a meeting next Monday at 5:30 PM SLC time.下周一盐湖城时区下午五点半开会。I want to have a teleconference with you regarding issues about report development and the XX project.我想跟你开一个电话会议，讨论下报告进展和 XXX 项目的情况。2.Seeking for more information/feedbacks/suggestions 咨询信息/反馈/建议 Shall yo
24、u have any problem accessing the folders,please let me know.如果存取文件有任何问题请和我联系。Thank you and look forward to having your opinion on the estimation and schedule.谢谢你,希望能听到更多你对评估和日程计划的建议。Look forward to your feedbacks and suggestions soon.期待您的反馈建议!What is your opinion on the schedule and next steps we pr
25、oposed?你对计划方面有什么想法?下一步我们应该怎么做?What do you think about this?这个你怎么想?Feel free to give your comments.请随意提出您的建议。If you have any questions,please do not hesitate to let me know.有任何问题,欢迎和我们联系。If you have any questions,please feel free to contact me.有任何问题,欢迎和我们联系。关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持
26、不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 Please contact me if you have any questions.有任何问题,欢迎和我们联系。Your comments and suggestions are welcome!欢迎您的评论和建议!Please let me know w
27、hat you think?欢迎您的评论和建议!Do you have any idea about this?对于这个您有什么建议吗?It would be nice if you could provide a bit more information on the users behavior.您若是能够就用户行为方面提供更多的信息就太感激了!At your convenience,I would really appreciate you looking into this case/matter/issue.如果可以,我希望你能负责这件事情。3.Give feedback 意见反馈
28、Please see comments below.请看下面的评论。My answers are in blue below.我的回答已标蓝。I have added some comments to the document for your reference.我就文档添加了一些备注,仅供参考。4.Attachment 附件 I enclose the evaluation report for your reference.关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯
29、芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 我附加了评估报告供您阅读。Attached please find todays meeting notes.今天的会议记录在附件里。Attachment is the design document,please review.设计文档在附件里,请评阅。For other known issues related to individu
30、al features,please see attached release notes.其他个人特征方面的信息请见附件。5.Point listing 列表 Today we would like to finish following tasks by the end of day:1.2.今天我们要完成的任务:1.2.Some known issues in this release:1.2.声明中涉及的一些问题:1.2.Our team here reviewed the newest SCM policy and has following concerns:1.2.我们阅读了最新
31、的供应链管理政策,做出如下考虑:1.2.Here are some more questions/issues for your team:1.2.以下是对你们团队的一些问题:1.2.The current status is as following:12 目前数据如下:12 Some items need your attention:1.2.以下方面需提请注意:1.2.6.Raise question 提出问题 I have some questions about the report XX-XXX 我对 XX-XXX报告有一些疑问。关产品标准规定选择合适的弯心并安装于试验机上调整试验
32、机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 For the assignment ABC,I have the following questions:就 ABC 协议,我有以下几个问题:7.Proposal 提议 For the next step of platfo
33、rm implementation,I am proposing 关于平台启动的下一步计划,我有一个提议 I suggest we can have a weekly project meeting over the phone call in the near future.我建议我们就一周项目开一个电话会议。Achievo team suggest to adopt option A to solve outstanding issue Achievo 团队建议应对突出问题采用 A 办法。8.Thanks note 感谢信 Thank you so much for the coopera
34、tion感谢你的合作!I really appreciate the effort you all made for this sudden and tight project.对如此紧急的项目您做出的努力我表示十分感谢。Thanks for your attention!谢谢关心!Your kind assistance on this are very much appreciated.我们对您的协助表示感谢。Really appreciate your help!非常感谢您的帮助!9.Apology 道歉 I sincerely apologize for this misunderst
35、anding!关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 对造成的误解我真诚道歉!I apologize for the late asking but we want to make sure the correct
36、ness of our implementation ASAP.很抱歉现在才进行询问,但是我们需要尽快核实执行信息。英文缩写及解释（用于 MSN 或 Office Communicator，非正式用语）AAMOF as a matter of fact 实际上 AFAIK as far as I know 据我所知 AKA also know as 亦称 ASAP as soon as possible 尽快 BBL be back later 等一下回来 B/C because 因为 BITMT but in the meantime 但是与此同时 BOT back on topic 回到主
37、题上来 关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 BRB be right back 马上回来 BTW by the way 顺便说一句 BSY be seeing you 再见 CWOT complete wast
38、e of time 完全是浪费时间 EOD end of discussion 结束争论 EOT end of transmission 通话结束 FAI frequently argued issue 经常讨论的问题 FAQ frequently ask question 常见问题 FITB fill in the blank 特别强调 F2F/FTF face to face 面对面 FTTT from time to time 关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为
39、为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 有时 FOS freedom of speech 言论自由 FUA frequently used acronyms 经常用的缩写词 FWIW for what it 抯 worth 不论真伪 FYI for your information 为你提供信息 HHOK ha ha,only kidding 哈哈，只不过开个玩笑 HHOJ
40、 ha ha only joking 哈哈，只不过开个玩笑 IAC in any case 总之 IAE in any event 无论如何 IC I see 我明白了 ICQ I seek you 我寻找你 ILY I love you 关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评
41、定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 我爱你 IMO In my opinion 按我的意见 IMHO in my humble opinion 依我拙见 IOW in other way 换句话说 JIC just in case 以防万一 LOL laughing out loud 放声大笑 NC no response necessary 无需答复 OIC oh,I see 哦，我明白了 OTOH on the other hand 另一方面 PLS please 请 RTM read the manual 阅读手册吧 SYSOP system operato
42、r 关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 系统操作员 THX thanks 多谢 TFS thanks for sharing 多谢你与我分享 TIA thanks in advance 事先表示感谢 TMK t
43、o my knowledge 尽我所能 TTBOMK To The Best Of My Knowledge 尽我所知 WB welcome back 欢迎你回来 WIIWD what it is we do 这正是我们要做的 WYSIWYG what you see is what you get 所见即所得 WRT with respect to 很荣幸 BRB be right back 马上就回来 PMFJI pardon me for jumping in 关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支
44、辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截学习好资料 欢迎下载 请原谅我突然加入你们的谈话 关产品标准规定选择合适的弯心并安装于试验机上调整试验机的支辘间距离此距离在试验期间保持不变支棍间距离按下表确定公称直径弯芯直径支辐间距或冷弯注公称直径为弯芯直径为为弯芯直径为钢筋的弯芯直径为将准备好的试缓慢而连续地施加试验力使之弯曲直至达到规定的弯曲角度取出弯曲试样检查试样弯曲外表面是否存在裂纹裂缝或裂断等情况结果评定弯曲试验后试样弯曲外表面无肉眼可见裂纹评定为合格否则为不合格若不合格则从同一批中再截