《D5379M 用V形切口梁法测定复合材料剪切性能的标准试验方法.docx》由会员分享，可在线阅读，更多相关《D5379M 用V形切口梁法测定复合材料剪切性能的标准试验方法.docx（1页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、ASTM D5379/D5379M用V形切口梁法测定复合材料剪切性能的标准试验方法ASTM D5379/D5379M用V形切口梁法测定复合材料剪切性能的标准试验方法一标准名称ASTM D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam MethodASTM D5379/D5379M用V形切口梁法测定复合材料剪切性能的标准试验方法ASTM D5379/D5379M用V形切口梁法测定复合材料剪切性能的标准试验方法一适用范围Scope：This test
2、 method covers the shear properties of composite materials reinforced by high-modulus fibers. The composite materials are limited to continuous-fiber or discontinuous-fiber-reinforced composites in the following material forms: Laminates composed only of unidirectional fibrous laminae, with the fibe
3、r direction oriented either parallel or perpendicular to the loading axis： Laminates composed only of woven fabric filamentary laminae with the warp direction oriented either parallel or perpendicular to the loading axisASTM D5379/D5379M用V形切口梁法测定复合材料剪切性能的标准试验方法一引用文件ASTM D792 Test Methods for Density
4、 and Specific Gravity (Relative Density) of Plastics by DisplacementASTM D883 Terminology Relating to PlasticsASTM D2584 Test Method for Ignition Loss of Cured Reinforced ResinsASTM D2734 Test Methods for Void Content ofReinforced PlasticsASTM D3171 Test Methods for Constituent Content of Composite
5、MaterialsASTM D3878 Terminology for Composite MaterialsASTM D5229/D5229M Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite MaterialsASTM E4 Practices for Force Verification of Testing MachinesASTM E6 Terminology Relating to Methods of Mechanical
6、TestingASTM Elll Test Method for Youngs Modulus, Tangent Modulus, and Chord ModulusASTM E122 Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or ProcessASTM E177 Practice for Use of the Terms Precision and Bias in ASTM Test MethodsASTM E251 Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain GagesASTM E456 Terminology Relating to Quality and StatisticsASTM E1237 Guide for Installing Bonded Resistance Strain Gages