《ABAQUS接触例题.pdf》由会员分享,可在线阅读,更多相关《ABAQUS接触例题.pdf(34页珍藏版)》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、1/34 C.2 c.1 Click middle mouse 2/34 Click enter 3/34 Double click middle mouse 4/34 5/34 Click middle mouse 6/34 7/34 Click middle mouse 8/34 Click middle mouse 9/34 Click middle mouse exit sketcher 10/34 11/34 Enter 0.25,click enter,click middle mouse Select this edge 12/34 13/34 Click middle mous
2、e Enter 0.75,click enter,click middle mouse 14/34 15/34 Select boundary of the datum plane 16/34 Click middle mouse Click middle mouse 17/34 Select the cylindrical inner surface of the hole 18/34 C.3 19/34 Select all 20/34 21/34 Double click 22/34 23/34 C.5 Click middle mouse 24/34 Enter 0.012 Enter
3、 0.06,click enter Double click 25/34 26/34 C.6 27/34 click Flip to change the direction of the arrow.Click OK when the arrows point toward each other.In the text box that appears in the prompt area,type the clearance(0.04)that will remain between the two parts,as measured along the normal to the selected face of the fixed part,and press Enter.28/34 29/34 30/34 C.6 C.6.4 31/34 32/34 33/34 (0,0,0)ENTER END POINT(0,0,0.02)CLICK ENTER 34/34 Select all done C.7