《FURUNO电子海图完整题库2722.pdf》由会员分享，可在线阅读，更多相关《FURUNO电子海图完整题库2722.pdf（18页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、实用文档 1.What does the alert number 820 indicate?A.AIS lost B.TT lost C.Navtex message received D.Cross track alarm 2.What does the alert number 450 indicate?A.Route:Illegal To WPT B.RADAR comm.Error C.LAN adapter version error D.Heading sensor not available 3.What does the alert number 495 indicate?A
2、.Anchor watch error B.Track control stopped C.Steering parameter error D.Filter:Init.4.What does the alert number 380 indicate?A.Route:File read error B.User chart:File not found C.AIS COM error D.User chart:File read error 5.What does the alert number 635 indicate?A.No official data B.Log error C.D
3、ual axis log(WT)error D.Dual axis log(BT)error 6.What does the alert number 640 indicate?A.Datum mismatch B.Chart align:Over 30 min.C.RADAR antenna ID error D.Gyro error(Trackpilot)7.What does the alert number 031 indicate?A.Sensor adapter 1 COM timeout B.Sensor adapter 2 COM timeout C.Sensor adapte
4、r 3 COM timeout D.Sensor adapter 4 COM timeout 8.What does the alert number 257 indicate?A.Heading sensor not available B.Prg track:Need higher speed C.Prg track:Use radius Ctrl D.Gyro 3 COM error 9.What does the alert number 470 indicate?A.WGS 84 not used B.Different geodetic datum C.Sentence synta
5、x error 实用文档 D.Datum change 10.Where do you control the settings and visibility of the chart layers?A.In Chart Legend B.In Symbol Display C.In Chart Display D.In Basic Setting 11.Where do you set the Safety Depth?A.In Chart Legend B.In Symbol Display C.In Chart Alert D.In Chart Display 12.Where do y
6、ou set the Shallow Contour?A.In Chart Legend B.In Symbol Display C.In Chart Alert D.In Chart Display 13.Where do you set the Deep Contour?A.In Chart Legend B.In Symbol Display C.In Chart Alert D.In Chart Display 14.Where do you set the Safety Contour?A.In Chart Legend B.In Symbol Display C.In Chart
7、Alert D.In Chart Display 15.Where do you set the Shallow Pattern?A.In Chart Display B.In Symbol Display C.In Basic Setting D.In Chart Catalogue 16.Where do you control the AIO?A.In Chart Legend B.In Symbol Display C.In Chart Display D.In Chart Catalogue 17.Where do you select the color Palette used
8、to display the charts?A.In Chart Legend B.In Chart Display C.In Quick Access Bar D.In Chart Catalogue 18.Where do you switch between Multicolor and Two Color settings for the charts?A.In Chart Legend B.In Symbol Display 实用文档 C.In Basic Setting D.In Chart Display 19.When an ENC is outlined in Green i
9、n the Chart Catalogue-it means?A.License is valid-chart is up-to-date.B.License is valid-chart is NOT up-to-date.C.License is available-chart not installed.D.License is not available or has expired.20.When an ENC is outlined in Orange in the Chart Catalogue-it means?A.License is valid-chart is up-to
10、-date.B.License is valid-chart is NOT up-to-date.C.License is available-chart not installed.D.Cancelled chart.21.When an ENC is outlined in Magenta in the Chart Catalogue-it means?A.License is valid-chart is up-to-date.B.License is valid-chart is NOT up-to-date C.License is available-chart not insta
11、lled D.License is valid-up-to-date status doubtful.22.When an ENC is outlined in Yellow in the Chart Catalogue-it means?A.License is valid-chart is NOT up-to-date.B.License is available-chart not installed.C.License is valid-up-to-date status doubtful.D.License is not available or has expired.23.Whe
12、n an ENC is outlined in Red in the Chart Catalogue-it means?A.License is valid-chart is NOT up-to-date.B.License is available-chart not installed.C.License is valid-up-to-date status doubtful.D.License is not available or has expired 24.When an ENC is outlined in Blue in the Chart Catalogue-it means
13、?A.License is valid-chart is up-to-date.B.License is valid-chart is NOT up-to-date.C.License is available-chart not installed.D.Cancelled chart.25.Where can you find information concerning the charts stored on the HDD?A.On the Internet.B.The Chief Officer will know.C.In the chart catalogue.D.In the
14、Chart Display menu.26.How can you tell if your FURUNO ECDIS is displaying an ENC?A.There is an ENC Data available indication in the Own Ship Functions Box.B.There is an RNC data indication in the Own Ship Functions Box.C.The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D.There
15、is no special indication in the Own Ship Functions Box.27.Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A.In Chart Display 实用文档 B In Chart Catalogue C In Chart Alert D In Chart Legend 28.Which information can you find in the Vector Chart Legend?A Magnetic Variat
16、ion B Base CD number C Permit expiration date D Safety Contour setting 29.Which information can you find in the Vector Chart Legend?A T&P Notices B Name C Warnings D Safety Contour setting 30.Which information can you find in the Vector Chart Legend?A Notices To Mariners B Presentation Library editi
17、on number C Chart edition&Update date D Safety Contour setting 31.Which information can you find in the Raster Chart Legend?A Magnetic Variation B Safety Contour setting C Quality of data D T&P Notice 32.Which information can you find in the Raster Chart Legend?A Horizontal datum B Safety Depth C Us
18、er Permit number D License number 33.Which information can you find in the Raster Chart Legend?A Shallow Contour B Chart Name C Chart Viewing date D Deep Contour 34.Which information can you find in the Raster Chart Legend?A Edition number B Last displayed update C Edition date D Update issue date 3
19、5.How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Status Bar.D I select RNC in the Chart Catalogue.36.How do you switch from Raster chart to Vect
20、or chart on the FURUNO ECDIS?实用文档 A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object(Buoy-Beacon-Berth etc.)on the
21、FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How do you record Own Ships position on the ECDIS charts when you have a Range/Bearing observation
22、from your RADAR?A I cannot record own ships position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the CTRL&ACQ/ACT button on the Control Unit.D I select RecordEvent Log and User Event from the Instant Access bar and insert the observation in the Recor
23、d User Event window.b 39 Which operation can you perform on the FURUNO ECDIS?A I can record target ships positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Rou
24、te Plan and User Chart and Notes to a FURUNO GPS for display on the GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my setting of Ships maximum draft.C I can set Ships
25、 maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41 Which operation can you perform on the FURUNO ECDIS?A I can play back my ships past track on the ECDIS.B I can record m
26、y position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage log automatically.b 1 42 How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documen
27、tation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyage?实用文档 A I can use the Event function to record special events in the Eve
28、nt Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memory device.D I can create a User Chart from the Voyage Log and save it to a USB memory device.44 Which operation can you perform durin
29、g a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ships past track(120 minutes max.)on a USB memory device and keep the copy in a safe location for
30、future reference.D I can reset the Chart Usage Log after creating a backup copy.45 Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I
31、 can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an external storage.46 Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding further detail to th
32、e past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memory device.C I can create a backup copy of the Voyage log on a USB memory device.D I can view and print a copy of the Chart Usage Log.47 Which recording function is available in the FURUNO ECDIS?A Danger
33、Targets Log B Engine Log C Speed Log D GPS Log 48 Which recording function is available in the FURUNO ECDIS?A AIS Log B Engine Log C Voyage Log D RADAR Log 49 Which recording function is available in the FURUNO ECDIS?A Gyro Log B Engine Log C Ships Log D Details Log 50 How do you manually record Own
34、 Ships current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.D By using the record position event function of the Event Log.51 What is a Manual Update?实
35、用文档 A A Manual update is an update applied using the Manual function in Load&Update Charts.B A Manual update is an update to the charts created by the operator from information received from the Pilot-a Navtex message-a VHF broadcast etc.C A Manual update is an update applied to the charts by an off
36、icial representative of the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS.52 How do you delete a specific object added using the Manual Update function?A I select Clear in the Manual Update window.B I use the Delete function in the File Export t
37、ool.C I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53 How do you modify an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol
38、Display function.C I cannot modify a Manual Update-only delete it.D I use the List tab of Manual Update tool function.54 How can you see if a chart object is created using Manual Updates?A The Manual Update will be larger than any other chart objects.B It is always shown in red.C It will have a spec
39、ial orange marker.D There is no way I can see if a chart object is created using Manual Updates.55 Which color scheme is used for a Manual update on the Furuno ECDIS?A Blue ENC symbols B Standard ENC symbols C Orange ENC symbols D Red ENC symbols 56 Where can Manual Updates be displayed?A Only on EN
40、Cs B Only on RNCs C Only on Vector charts D On all types of charts in the ECDIS 57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?A In the Chart Legend B In the Manual Update Window C In the Chart Catalogue D In the Chart Display menu 58 How do you hide(no
41、t delete)a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the Chart Display dialogue.D I deselect the option from the Symbol Display dialogue.59 Which Manual Update objects can be
42、hidden from view by operator selection?A Only the Manual Updates Special Areas(from the Chart Display dialogue)实用文档 B All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys(from the Chart Display dialogue)D Only the Manual Updates Soundings(from the Chart Display
43、dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes-by manually creating the object.B Yes-by letting the ECDIS create the object automatically.C Yes-either by creating it manually or letting the ECDIS create it automatically.D No 61 Can you create a Manual
44、Update from a Navtex Message shown on the ECDIS?A Yes-by manually creating the object.B Yes-by letting the ECDIS create the object automatically.C Yes-either by creating it manually or letting the ECDIS create it automatically.D No 62 Where do you change the visibility of your Monitored route?A In C
45、hart Legend B In Symbol Display C In Chart Display D In Chart Catalogue 63 Where can you update the ENCs?A In the Chart Manager(Individual Update)B In the Update function of the Chart Display C In the Update function of the System Settings D In the Update function of the Chart Legend 64 Where can yo
46、u update the RNCs on the Furuno ECDIS?A In the Update function of the Menu B In the Chart Manager(Individual Update)C In the Update function of the Chart Catalogue D In the Update function of the Chart Legend 65 How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?A I use
47、 the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the Chart Details function in the Chart Catalogue.66 How are regular T&Ps updated on the ECDIS?A T&Ps must always be created as Manual Updates.B I create a Manual
48、 Update containing the T&Ps using the Manual function in the Load&Update function of the Chart Menu.C Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.D I cannot update T&Ps on the FURUNO ECDIS.67 How do you update your rast
49、er charts on the Furuno ECDIS using the RNC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.实用文档 D I import the information using the Chart Details function in the Chart Catalogue.68 How are
50、loaded ENCs converted into SENCs when updating?A The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit file using the file named ENC.PMT and then I use the S52 Presentation Libr