《intouch怎么通过DASMBTCP与施耐德以太网通讯21450.pdf》由会员分享，可在线阅读，更多相关《intouch怎么通过DASMBTCP与施耐德以太网通讯21450.pdf（8页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、 intouch 怎么通过DASMBTCP 与施耐德以太网通讯 Hessen was revised in January 2021 Configuring MBTCP(Version to Communicate with a MODICON Bridge This document and software are provided as is without warranty of any kind.See the for more information.The MBTCP DAServer is one of Wonderwares new generation of Archest
2、ra-based products that provides connectivity to the following plcs via Ethernet:Quantum TSX Momentum Modicon Micro Note:The above three plcs are the only ones currently supported by this release.This technote provides step by step instructions for configuring each faceplate(screen)within the SMC(Sys
3、tem Management Console)where the DAS MBTCP DASServer resides.Adding a New_TCPIP_PORT_000 1.Open the SMC from the Start menu(Start/Programs/Wonderware).FIGURE 1:SMC 2.Expand the server icon.3.Right-click Configuration(just below and select Add.A new faceplate will appear labeled New_TCPIP_PORT_000(Fi
4、gure 2 below):FIGURE 2:NEW_TCPIP_PORT_000 Note:You can right click on any of the entries below the Configuration entry above and rename it to whatever you like.Adding a New_ModbusBridge_000 Object 1.Right Click New_TCPIP_ Port_000 and select Add a ModbusBridgeObject(Figure 3 below):FIGURE 3:ADD MODB
5、USBRIDGE OBJECT You should now see a new faceplate appear labeled New_ModbusBridge_000 Object(Figure 4 below):FIGURE 4:NEW MODBUSBRIDGE FACEPLATE Note:You will need to enter in the IP Address of the BRIDGE DEVICE,as shown in Figure 4 above.Adding a PLC Object 1.Right click the New_ModbusBridge_000 i
6、con and add a plc device.(In the following figure,a Modicon_Micro_000 object is selected.It is a 5 digit device):FIGURE 5:ADD MODICONMICRO OBJECT FIGURE 6:NEW_MODICONMICRO_000 FACEPLATE 2.Enter the Slave device of the plc in the PLC unit ID field(Figure 6 above).Set Up a Topic Definition in the Devi
7、ce Group Setting up a Topic Definition must be done so that Suitelink/DDE clients can communicate with the MBTCP DAServer.1.Select the Device Groups tab(Figure 6,above).2.Right click in the first row,and select Add.FIGURE 7:ADD TOPIC A new topic appears(Figure 8,below):FIGURE 8:ADD TOPIC 3.Change To
8、pic_0 to whatever you want by right-clicking on it and selecting Rename.In the following figure,the Topic is called Micro(Figure 9 below):FIGURE 9:RENAME THE TOPIC Creating an Access Name in InTouch to Communicate with the DASMBTCP Server 1.Launch InTouch WindowMaker.2.Select Configure/Access Names
9、from the main menu.The Modify Access Name dialog box appears:FIGURE 10:APPLICATION NAME-DASMBTCP 3.Enter the above information for the Application Name field as it appears in Figure 10.4.For the topic name,enter in the name of the topic you renamed in the Device Groups tab field(,above)of the DASMBTCP server.