《IUWNE10S02L08-Understanding the Cisco Mobility Express Architecture.ppt》由会员分享，可在线阅读，更多相关《IUWNE10S02L08-Understanding the Cisco Mobility Express Architecture.ppt（15页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-1Basic Cisco WLAN InstallationUnderstanding the Cisco Mobility Express Architecture 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-2Cisco Smart Business Communication System 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-3WLAN S
2、olutions OverviewPositioning of Different WLAN Options 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-4Cisco 521 Wireless Express Lightweight Access PointCharacteristicsUp to three APs if managed individually only through Cisco Configuration Assistant Up to six APs if managed through Cisco C
3、onfiguration Assistant in controller-based modeOnly associates with Cisco Wireless Express Mobility ControllersFeaturesSingle radio IEEE 802.11b/gEnterprise-class security Industrys best range and throughputSimultaneous air monitoring and traffic deliveryBenefitsFrom secure coverage to advanced serv
4、icesZero-touch managementNo dedicated air monitors 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-5Cisco 521 Wireless Express Lightweight Access Point(Cont.)Has the same hardware characteristics as Cisco Aironet 1130AG Series AP,with exception of the 802.11a radio and the LED.It has 32 MB of
5、 memory with 16 MB of storageAside from the gray color,Cisco 521 AP has the same mechanical and physical characteristics as enterprise 1130AG Series AP.Operating temperature range of 32 to 104F(0 to 40C)Integrated and secure mounting systemUL2043-rated for placement in plenum areas521 AP is PoE-comp
6、liant and will consume about 10 W521 AP will only work with Cisco Mobility Express Solution Since there is no 802.11a radio,Dynamic Frequency Selection(DFS)is not available 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-6Cisco 526 Wireless Express Mobility ControllerCharacteristicsManaged th
7、rough Cisco Configuration AssistantSupports up to six Cisco Wireless Express APsTwo 10/100 Ethernet portsSupports only Cisco Wireless Express APsUp to two controllers per network FeaturesCentralized management of users,APs,policies,etc.Automated radio resource managementEasy virtual network with up
8、to eight SSIDs/VLANsMobility managementGuest access readyOptimized voice over Wi-Fi readyBenefitsEnterprise-level security for client authentication Cost-effective solution for SMBIdeal for data,voice,and videoIntegration with SBCS 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-7Cisco 526 Co
9、ntroller is supported by a derivative of the Cisco Unified Wireless Network controller codeIt has six-AP capacity support that connects to the CE 500 series switch or any other CDP-compatible switchesCisco 526 Controller works in conjunction with another Cisco 526 Controller to support a max.of 12 l
10、ightweight APs or controller-mode APsCisco 526 Controller does not have a service port for out of band management.Port#1 can be used instead for first time out of box configurationCisco 526 Wireless Express Mobility Controller(Cont.)2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-8Cisco Mobil
11、ity Express SolutionSMB-focusedCisco Unified Wireless NetworkEnterprise-FocusedCapacity/Scalability6 APs per controller2 controllers per NetworkStay Within the 500 SeriesUp to 150 APs per controllerH-REAP supportedAll APs supported on all controllersRoaming2 controllers,1 mobility groupLayers 2 and
12、348 controllers,48 mobility groupsLayers 2 and 3SecurityEncryption and authenticationEncryption and authenticationIntrusion detection and preventionIntegrationShared management with the SBCS Elements(all technologies included)Some features share management with the wired infrastructure(security)Mobi
13、lity ApplicationsSimplified voice over Wi-FiGuest accessVoice over Wi-FiFull guest accessLocation-based servicesManagementCisco Configuration Assistant(View of multiple networks)Wireless control systemsNo upgrade path between each solution.Features based on Mobility Express code 4.2Deployment Recomm
14、endations 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-9Configuring Cisco 521 APs in Standalone Mode1.Launch Cisco Configuration Assistant on the PC connected to the switch2.On the Cisco Configuration Assistant screen choose Connect to a new community3.Enter the IP seed address of the stan
15、dalone AP connected to the CE520 switch 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-10Configuring the Mobility Express SolutionCisco Configuration Assistant is based on Cisco Network Assistant v5.0 that was already developed for easy configuration of the network devices that support CDPCN
16、A v 5.0 supports all of the Cisco autonomous APsCNA was modified to support Cisco Mobility Express SolutionCisco 521 Wireless Express Lightweight APs Cisco 526 Wireless Express Mobility Controller and controller-mode 521 APCisco Configuration Assistant is a free application can be downloaded from CC
17、isco Configuration Assistant installs on Windows systems 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-11Cisco Configuration Assistant Configuring Standalone 521 APThe AP shown in the Cisco Configuration Assistant topology view(as shown at right)can be configured by choosing the“Configure”t
18、abIt can also be migratedto lightweight modeBy clicking on the AP icon you can get AP information,as shown at right 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-12Configuring the Cisco 526 Mobility ControllerNew out of the box Cisco 526 Controller has to be initially configured as describe
19、d below:1.Directly connect Ethernet cable from a PC-1 to the controller management port(#1)2.PC-1 with dynamic IP configured;PC will receive IP address 192.168.1.100 from DHCP server on the controller.3.Launch web browser to controller http:/192.168.1.1 4.The startup wizard web UI will be displayed(
20、URL redirect)2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-13Configuring the 526 ControllerBoth Cisco Configuration Assistant and direct access are possible 2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-14SummaryThe Smart Business Communication System is a range of products adapted
21、 to the SMB range.It contains the Mobility Express wireless solution.The Cisco 521 AP is a standalone or LWAPP-based 802.11b/g AP,part of the Mobility Express solution.The Cisco 526 Controller can manage up to six Cisco 521 APs in LWAPP mode.There is no upgrade path between the Mobility Express solution and the Cisco Unified Wireless Network solution,though they offer features close to each other.The Mobility Express devices can be configured directly or using the Cisco Configuration Assistant software.2008 Cisco Systems,Inc.All rights reserved.IUWNE v1.02-15