《判断各种型号数通设备光模块厂家方法.doc》由会员分享，可在线阅读，更多相关《判断各种型号数通设备光模块厂家方法.doc（4页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、文档名称文档密级：内部公开 S3552/S3528系列、S5600/S3900系列 display transceiver-information interface GigabitEthernet 1/0/49 Hardware Type : - Interface Type : SFP Wave Length(nm) : - Vendor Name : AVAGO Serial Number : AM07467YZV Transfer Distance(m) 9um Fiber : 0 50um Fiber : 550 62.5um Fiber : 270 Copper Line : 0
2、Status Rxlos : signal detected 在上面显示的信息中“Vendor Name : AVAGO”就是光模块型号S7800系列S7800 display transceiver interface gi 3/0/9 GigabitEthernet3/0/9 transceiver information: Transceiver Type : 1000_BASE_SX_SFP Connector Type : LC Wavelength(nm) : UNKNOWN Transfer Distance(m) : 550(50um),270(62.5um) Digital
3、Diagnostic Monitoring : NO Vendor Name : AGILENT Ordering Name : N/A在上面显示的信息中“Vendor Name : AGILENT”就是光模块型号S8500系列S8500-VRP310-R1632及以后版本查询：在隐藏模式下：Quidway_hQuidway-hidecmd_display transceiver interface g5/1/6GigabitEthernet5/1/6 transceiver information: Transceiver Type : 1000_BASE_SX_MMF Connector
4、Type : LC Wavelength(nm) : 850 Transfer Distance : 550m(50um),270m(62.5um) Digital Diagnostic Monitoring : YES Vendor Name : H3C Max. TX Power(dBm) : 0.0 Min. TX Power(dBm) : -9.5 Min. RX Power(dBm) : -17.0 Max. RX Power(dBm) : -3.0 Original Manufacturer : Hisense Part Number : LTD8512-BC+-H3C Rev N
5、umber : Z Serial Number : DW07111720 Product Date : 2007-11-14在上面显示的信息中“Original Manufacturer : Hisense”就是光模块型号12XX及S8500-VRP310-R1632以下的版本FJ1_WN_DS_01display fiber-module g3/1/6GigabitEthernet3/1/6:Card info: 1000BASE-SFPFiber connect: LCVendorName: HisensePartNumber: LTD8512-BC+-H3CMode: MultiMode
6、WaveLength: 850nmLength for 50/125um: 550mLength for 62.5/125um: 270m 在上面显示的信息中“VendorName: Hisense”就是光模块型号AR系列路由器 Router display interface GigabitEthernet 1/0/1GigabitEthernet1/0/1 current state : DOWNIP Sending Frames Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc00-1500The Maximum Transmit
7、 Unit is 1500Media type is twisted pair, loopback not setPort hardware type is 1000_BASE_SFP 100Mbps-speed mode, unknown-duplex modeLink speed type is force link, link duplex type is autonegotiation Transfers distance(m) :9um Fiber: 0 50um Fiber :0 625um Fiber : 1000 copper line :100 Serial Num is 1
8、23456789 Vender Name is 3com 3C Number is 123456789在上面显示的信息中“Vender Name is 3com”就是光模块型号Eudemon200/300/500/1000display interface GigabitEthernet 2/0/0GigabitEthernet2/0/0 current state : UP Line protocol current state : DOWNDescription : HUAWEI, Eudemon Series, GigabitEthernet2/0/0 Interface The Max
9、imum Transmit Unit is 1500 bytes, Hold timer is 10(sec) Internet protocol processing : disabledIP Sending Frames Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc47-31bb Hardware is GigabitEthernet VendorName : AGILENT Compliance : 1000BASE-SX PartNumber : HFBR-5710L Mode : MultiMode LaserwaveLe
10、n : 850 Length for 50/125um : 550m Length for 62.5/125um : 270mOutput queue : (Urgent queue : Size/Length/Discards) 0/50/0Output queue : (Protocol queue : Size/Length/Discards) 0/1000/0 Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0 no negotiation auto , speed 1000M , duplex full, loopback not setStatistics last cleared: never! Last 5 minutes input rate 0 bytes/sec, 0 packets/sec Last 5 minutes output rate 0 bytes/sec, 0 packets/sec在上面显示的信息中“VendorName : AGILENT”就是光模块型号2023-1-15华为机密，未经许可不得扩散第4页, 共4页