《注塑机工作原理.ppt》由会员分享，可在线阅读，更多相关《注塑机工作原理.ppt（7页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、注射系統注射系統 Injection System料斗加熱器噴嘴往復式螺杆料管可動側固定側模板注道往復式螺杆結構往復式螺杆結構加料段壓縮段計量段螺杆料管注塑機操作順序一注塑機操作順序一1.模具關閉，螺杆後退，準備充填2.The mould close and the screw begins moving forward for injection.2.螺杆前進，直到型腔填滿3.The cavity fills as the reciprocating screw moves forward,as a plunger.3.螺杆持續前進，維持型腔保壓4.The cavity is packed
2、as the screw continuously moves forward.4.型腔持續冷卻至澆口凝固，螺杆後退5.The cavity cools as the gate freezes off and the screw begins to retract to plasticize material for the next shot.注塑機操作順序二注塑機操作順序二5.模具打開，將製品頂出6.The mould opens for part ejection.6.模具關閉，等待下次成型7.The mould closes and the next cycle begins.注塑機操作順序三注塑機操作順序三注射成型的週期時間注射成型的週期時間Cooling TimeMould Open TimeFill TimeHold Time充填時間保壓時間冷卻時間開模時間Cycle Time:Fill Time:Hold Time:Cooling Time:Mould Open Time:22Sec.19102成型週期時間成型週期時間计算计算