《ASTM D1002拉伸剪切强度测试.docx》由会员分享，可在线阅读，更多相关《ASTM D1002拉伸剪切强度测试.docx（1页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、ASTM D1002拉伸剪切强度测试ASTM D1002拉伸剪切强度测试一标准名称ASTM D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading （Metal-to-Metal）ASTM D1002通过拉力负荷测定单搭接胶着结合的金属试样表面抗剪强度的试验方法（金属 对金属）ASTM D1002拉伸剪切强度测试一适用范围Scope：This test method covers the dete
2、rmination of the apparent shear strengths of adhesives for bonding metals when tested on a standard single-lap-joint specimen and under specified conditions of preparation and test.该试验方法包括在标准单搭接接头试样和规定的制备和试验条件下进行试验时，测定粘接金 属的粘合剂的表观剪切强度ASTM D1002拉伸剪切强度测试一相关标准EN 1373胶粘剂 地板和墙壁覆盖物用粘合剂的试验方法剪切试验/Adhesives
3、- Test methods for adhesives for floor and wall coverings - Shear test;ASTM D3163用抗拉荷载法在剪切胶粘剂粘接刚性塑料搭接接头的抗剪切强度的标准试验方 法/Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension LoadingBS EN 1465粘合剂.粘结的配件拉伸重叠部分剪切强度的测定/Adhesives. Determination
4、 of tensile lap-shear strength of bonded assembliesGB/T7124胶粘剂I拉伸剪切强度的测定（刚性材料对刚性材料）/Adhesives-Determination of tensile lap-shear strength of rigid-to-rigid bonded assembliesISO 4587胶粘剂.拉伸剪切强度的测定（刚性材料对刚性材料）/Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assembliesASTM D1002通过拉力负荷测定单搭接胶着结合的金属试样表面抗剪强度的试验方法（金属 对金属）/Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading （Metal-to-Metal）