《叉车培训资料-NICHIYU力至优7代FB系列叉车故障代码.docx》由会员分享，可在线阅读，更多相关《叉车培训资料-NICHIYU力至优7代FB系列叉车故障代码.docx（4页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、叉车培训资料-NICHIYU力至优7代FB系列叉车故障代码*7FB*A1:CONTACTOR-MAINB10: FUSE-MAINB11: IGBT-TRAVELB12: SENSOR-CURRENT TRAVEL 电流传感器U相V相B13: DIRECTIONALB14: ACCELERATORC21: IGBT-HYDC22: SENSOR-CURRENT HYD 电流传感器U相V相C23: SWITCH-LIFTC24: POTENTIO-MAST 倾斜水平或提升电位计出错D30: FUSE-EPS加速输入减至1/2D31: SENSOR-EPS TOROUE EPS扭矩传感器加速输入减
2、至1/2D32: TR-EPS MAIN 加速输入减至1/2E40: TR-AOS 电流阀出错E41: POTENTIO-HYD LEVER AOS控制电位计出错E42: ENODER-HYD MAST 提升高度编码器F51: *FAIL CURRENT-TRAVER* 行驶马达电流F52: *FAIL CURRENT-HYD* HYD MONTOR CURRENTF53: *FAIL VOLTAGE-TRAVEL*F54: *FAIL VOLTAGE-HYD*F55: *REDUC DUTY-OPERATION* PCB OR IGBT TEMPXXX: *FAIL BUS SYSTEM*
3、DIPLAY TRANSWOO: *FAIL OPERATION* 行驶/液压跳闸W01: *TURN OFF DY SWITCH* 行驶/液压严重错误W02: *RELEASE PARKING BRAKE* W03: *REPLENISH REFINED WATER FOR BATTERY* 电瓶补水W04: *REFILL BRAKE OIL*W05: *REDUCE THE LOAD*W06: *REFILL HYDRAULIC OIL*W07: *CHARGE THE BATTERY*W08: *RELEASE ACCEL TO NEUTRAL*W09: *OFF HYD LEVER TO NEUTRAL*W10: *AOS(自动货叉放平) FAIL OPERATION* 电磁线圈没有电流通过W11: *RACK MISSET* 提升高度设定错误W12: *APPLY PARKING BRAKE* 操作者在未拉手刹时试图离开座位