《硬盘录像机.doc》由会员分享，可在线阅读，更多相关《硬盘录像机.doc（16页珍藏版）》请在taowenge.com淘文阁网|工程机械CAD图纸|机械工程制图|CAD装配图下载|SolidWorks_CaTia_CAD_UG_PROE_设计图分享下载上搜索。
1、【精品文档】如有侵权，请联系网站删除，仅供学习与交流硬盘录像机.精品文档.VEHICLE DVRUser ManualThis manual introduces the installation and operation procedures of the vehicle DVR system. To ensure proper performance and avoid any faulty operation, please study the manual carefully in advance. Notice: Device input Current is DC24V/12V
2、(3A). Please note AC200V/AC380V high-voltage power supply should not be applied. 1. Do not place anything on the device.2. Do not touch power supply and device when hand is with water.3. Do not use chemical solution to clean the device. 4. Do not splash water in device, which may short-circuit the d
3、evice and lead to fire 5. Cut off power supply if the device will be not used for long time. Fittings List:NO.Product NameQty (pcs)1Video recorder12Remote Controller13Key14Hydraulic cushion (with fixing screw and aluminum ring)45User manual164 group video input wiring17Power supply input wire18Right
4、 angle installation stent49Wiring protection box110Four-core camera plug（video input, power supply input）4CONTENTS1. Product Features42. Product Parameter53. Front Panel, Back Panel and remote controller64. Operation Instruction (main menu)94-1 System Setup94-1-1 Password Setup104-1-2Time Setup114-2
5、 Camera Setup124-3Record Setup124-3-1Record Speed134-4 Record Schedule144-5 HDD Setup144-6 System Restore 165. View CONTROL166. Playback Control177. USB Backup188. Record Control199. 4CH Continuous Recording hardware capacity requirement1910. Software Guide191. Product Features1) The device adopts p
6、atented aseismatic technology for viehcle harddisk: mechanical aseismatic, electronic aseismiatic and software aseismiatic technology. The aseismatic technologies adopted ensure reliable performance of the device.2) MJPEG adopted ensures high compression ratio and high resolution. 3) The device supp
7、orts local real-time / non-real time audio/video record and computer playback (via USB). 4) Multi-model video-recording functions: A. Record starts and stops with vehicle. B. Record starts with vehicle and stops 10-30 minutes after the vehicle is stopped. C. Start and stop recording according to pre
8、set time.5) Convenient search function: can be searched by date or time.6) Support remote control and 2.5 inches notebook hard disk. 7) Apply floated hydraulic pressure aseismatic system for hard disk. 8) Specially designed long-pin harddisk insertion mode ensures reliable connection. 9) 1,2, or 4 V
9、ideo input can be selected; 1 video output and 1 audio output 10) 836v broad voltage input, 12V, 2A output supply power to video camera or others devices.11) Quartered or full screen. 12) With flexible frame, the device can be hanged up or placed flat.13) Protection box prevents the wiring from bein
10、g damaged.14) Convenient output interface can supply 12v DC power to small TV during testing.15) Unique concentrated audio/video input interface and wiring realize convenient installation.2. Product ParameterParameterDS-2004SystemOperation SystemEmbedded Operation System PSOS Operation InterfacePict
11、ure Menu InterfaceOperation ModelRemote ControlAudio-videoVideo Input and output Video Playback formula / standard PAL（625 line, 50 / s）/ NTSC（525 line, 60 / s）Interface ParameterInterface model：RCA; Input impedance: 75; Input signal: 1.0Vp-pAudio Input and Output InterfaceRCAVideo Compression Model
12、MJPEGAudio coding method PCMVideoVideo Resources Video4 Real time Recording Audio1 Audio InputReal-time Monitoring ResolutionD1: 704576（PAL）/720480（NTSC）Real-time Monitoring Horizontal Definition350 TV LineVideo Picture Parameter AdjustmentTonal, Brightness, Contrast, Saturation Video Picture Resolu
13、tion CIF： 352288（P）/352240（N）Video playback Horizontal Definition 320 TV LineVideo Picture Quality 3 shelf adjustable Video Playback Function Supports PC USB, Local Video Playback, Frame Play, Slow Play, Quick PlayVideo backup model Mobile Hard Disk Box and High Speed USB2.0 Mobile Memory Video Mode
14、l1. Record starts with car 2. Record starts and stops automatically at preset times 3. Record starts when car is started by key, and record stops 10min-30min after the key is unplugged.Video Audio Code 4 channels of CIF：1.2-1.5G Byte/ Hour（may changes with video picture）Play Interface ResourcesVideo
15、 Interface1 video outputAudio Interface1groupParameterAnti-seismic PerformanceContinuous Working Period8 hours Frequency 0100Hz,Width 10mmVibratory Frequency0100HzVoltage Rating+9VDC+36VDC）Rated Current1A（not include hard disk）Starting Current3AMean Power9W（not include hard disk）Temperature Range -3
16、0+65Humidity Range 10%90%Bare Machine Weight1.5Kg Device Size22017558（mm）3. Front Panel, Back Panel and remote controller1) Front Panel (Picture 1)(1) Hard disk box and power supply switch lock: Insert the key, then turn it to ON, the harddisk case will be locked and device is powered on. Turn it to
17、 OFF, the case will be unlocked (and can be pulled out) and device is powered off.(2) IR remote receiver：It receives the infrared signal from remote controller.(3) HDD hard disk status light: Red light on indicates working status of harddisk. The light will be on during video recording and video pla
18、ying.(4) PWR power supply light：It indicates power on when the light is on.(5) USB interface: It connects with PC and transmits data from the device to PC(6) OUTPUT interface: It connects with monitor, exports video and audio and supplies 12VDC power to small TV.(7) Installation Frame：It is used to
19、support the device during installation.2) Back Panel (Picture 2)(1) POWER interface: After plug in power input wires, you can connect the wires to power positive and negative in vehicle (Usually connect to vehicle battery, with range from 9-36VDC) and ACC trigger voltage (Usually connect to key posi
20、tion or main switch of the vehicle, the range is also 9-36VDC), or connect to timing controller.(2) IN &OUTPUT interface: Audio-video input, Camera power input. After insert audio-video input wire (as displayed in picture 3), 4 channels of audio-video signal can be inputted via the 4 four-core socke
21、ts; at the same time, 12VDC power can be supplied to four cameras. The 4 four-core sockets can be connected to recorder via the 4 four-core camera plugs provided. The four-core camera plug provided (in picture 4) has four wires: red, black, yellow and white. The four wires should be connected as sho
22、wn below:A. Red: connect to camera power positive (If you have a tone arm, please also connect to the tone arm power positive) B. Black: connect to camera power positive (If you have a tone arm, please also connect to the tone arm power negative)C. Yellow: connect to camera video signal output. D. W
23、hite:（If you have a tone arm, please connect to the tone arm signal output）Notice: This Vehicle DVR only supports the first camera input with audio.(3) Installation hole for wiring protection box (picture 5) 3). Remote controller (picture 6)(1) CH1 Full Screen display(2) CH2 Full Screen display (3)
24、MENU: enter or exit menu(4) ENTER: enter or modify menu option(5) STOP: stop video / stop play / move down the cursor after enter menu(6) PLAY: playback video.(7) CH3 Full Screen display(8) CH4 Full Screen display(9) PAUSE, Upper / Pause Playback / Frame Play(10) Left, Back (11) Right, Quick(12) REC
25、, Start video.(13) Four spited picture on screen4. Operation Instruction (main menu) Press to select items, use to enter, press MENU to exit.4-1 System Setup Press to select items, use to enter, press MENU to exit and save data.(1) Buzzer Alarm Time: setup, 0-30s.(2) Disconnection Alarm：ON/OFF. (3)
26、MOT：Motion Alarm, ON-OFF (4 Types), Front is buzzer Alarm. Behind is jump to alarm picture.(4) Output volume: 00-10. (5) Resolution（Option）：1024768, 10241280,640480,800600(default value 1024768).(6) Software upgrade：Please save updated software in a USB drive. The screen will show both current versi
27、on and new version of software before upgrading When upgrading is in progress, please dont start any other operation or remove the USB drive which may lead to serious system error. After upgrading is completed, the system will indicate to restart the unit. During upgrading, hard disk should be avail
28、able to be served as buffer.4-1-1 Password Setup Press and to select the characters on the screen.Press to confirmIf you want to change your password, please input the original password according to the requirement and then input the new one for twice.default password: 111111.4-1-2 Time SetupPress t
29、o select items, use to enter, press MENU toexit and save data.4-2 Camera Setup Press to select items, use to enter,press MENU to exit and save data.(1) Camera: Camera select (default value CH1).(2) Record setup: video recording is needed or not.(3) BRI/CON/HUE/SAT setup: default value is 5.(4) Sensi
30、tivity：sensitivity setup of motion detector:1-4.(5) Auto Switching: Set the duration of each channel: Off, 1 to 10 seconds. 4-3 Record SetupPress to select items, use to enter,press MENU to exit and save data.(1) Video Record Quality: video quality selection: Highest, High, Normal.(2) Alarm video re
31、cording time: start video recording once alarm is initiated. Maximum 30 seconds can be set.4-3-1 Record Speed Press to select items, use to enter, setup. press MENU to exit and save data. 4-4 Record SchedulePress to select items, use to enter, setup.Press MENU to exit and save data.(1) Use to change
32、 record mode.(2) Time range: 0-23 Hours.(3) Set blue for disable the recording. (4) Set red for continuous recording.(5) Set green for motion recording.4-5 HDD Setup Press to select items, use to enter, setup.Press MENU to exit and save data.(1) Overwrite Enabled: Enable overwrite when HDD capacity
33、is full:Yes: Overwrite every four hoursNo: Stop recording(2) HDD Status Indicates current HDD status, including total capacity and percentage of space being used.(3) HDD Format：When choose this item, DVR will request for password.a) If the password is correct, the system will display a message showi
34、ng the hard disk is during overwriting. After overwriting is completed, it returns to HDD setup.b) When the password is incorrect, it displays wrong password and then returns to the HDD setup.Factory default password: 111111.HDD must be formatted before installation, replacement & re-installation.4-
35、6 System Restore Press to restore the default settings, Press MENU to exit.5. View CONTROL(1) Following view control can be applied to monitor images from different cameras. Camera #1 (CH1), return to four-picture mode when press again.Camera #2 (CH2), return to four-picture mode when press again.Ca
36、mera #3 (CH3), return to four-picture mode when press again.Camera #4 (CH4), return to four-picture mode when press again.(2) When press , PTZ is on. The screen will switch to different channels by every press. The screen starts from CH1 to CH2, CH3 to CH4. From CH4，it returns to four-picture mode b
37、y one more press. 6. Playback Control1) Press u , and the system shows the recorded period.2) Press MENU, system will convert to SEARCH TIME Mode(1) Playback by event record list:Press choose the event, then press u to play. Device enters monitor mode once record play is completed Press MENU during
38、playback will enter USB BACKUP mode.(2) Playback at preset time: Use and to change time and date, When the time/date is set, press to play. Press MENU to exit.3) Event List:(1) Time: the DVR automatically records and saves events every four hours. (2) Motion: Motion event will be recorded in the lis
39、t4) Playback:(1) Press button for fast forward. Press one more time for faster speed. Total three variable speeds.(2) Press button for fast backward. Press one more time for faster speed and total three variable speeds. (3) Press button to pause.(4) Press button to stop playback. 7. USB BackupPress
40、MENU can convert to BACKUP mode during Video playback Press to setup start time, press to setup end time（After setting up both start and end time, the device will indicate the size of the file. Press or REC to start backup. Press STOP to exit8. Record Control(1) Press key to start recording. Recordi
41、ng will be indicated on the left bottom of the screen which indicates recording is in process.(2) Press on remote controller, MUTE is displayed and there will be no sound. The system returns to normal by another press.9. 4CH Continuous Recording hardware capacity requirement Following calculation is
42、 only for reference, the data may change with video change ratio. (Take 160G hardware as example)Recording Results inNTSC Standard60 fps 30fps15fps1 fpsVideoStandardVideoQualityNTSCHighest25Hrs50Hrs100Hrs1500HrsHigh40Hrs80Hrs160Hrs3400HrsNormal52Hrs105Hrs210Hrs3150HrsRecording Results inPAL Standard
43、50fps25fps12fps1 fpsVideoStandardVideoQualityPALHighest23Hrs45Hrs90Hrs1125HrsHigh38Hrs75Hrs150Hrs1775HrsNormal50Hrs100Hrs200Hrs2500Hrs10. Software Guide1) Playback backup data(1) Start VVF Player(2) Right-click the mouse and select Open File. Select the backup file (.vvf format) and start play.2) Ca
44、pture and save picture(1) During playback, click Pause at the time the needed screen displayed.(2) During “Pause”, right-click the mouse and select Capture/Mark In to set the picture as the start time. (3) During playback, click Pause at the time the needed screen displayed.(4) During “Pause”, right
45、-click the mouse and select Capture/Mark In to set the picture as the end time.(5) Right-click the mouse, select Capture/Export and save the data.3) Convert File to AVI Format(1) Right-click the mouse and chooseExport/AVI.(2) Set Input / Output File, Compression, output Channel and Audio.(3) Click O
46、K to start converting file to AVI format.4) Options(1) Right-click the mouse then select option(2) Always on top：The window always stays on top.(3) Use DirectDraw：Strengthen picture by DirectDraw of DirectX of Microsoft. Better picture quality will be obtained by this function. Do not select if your video card does not support DirectX.(4) Show playback time：Display the length of playback time.(5) Repeat playback (6) On screen display date/time